1. Forum
  2. FSXNet
  3. FSX BBS

  • Talisman

    From Rick Smith@21:1/190.1 to apam on Wed Dec 2 20:36:42 2020
    Greetings apam!


    Been looking at talisman bbs, looks really good... I havent read all the way through yet so if covered in docs I apologize, plans to support jam? Message areas all need to manually configured or can you import .NA?




    ----
    Regards,


    Rick Smith (Nitro)

    ... HALF A CENTURY OLD BBSing GRANNY *&&*
    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: ----> Abacus Sysop Point --->>>>bbs.abon.us:2323 (21:1/190.1)
  • From apam@21:1/126.1 to Rick Smith on Thu Dec 3 15:14:27 2020
    Been looking at talisman bbs, looks really good... I havent read all
    the way through yet so if covered in docs I apologize, plans to
    support jam? Message areas all need to manually configured or can you
    import .NA?

    Thanks :) No, no plans to support JAM. Areas must be configured manually
    at present, though I could look at importing NA.

    Andrew


    --- Talisman v0.7-dev (Linux/armv7l)
    * Origin: HappyLand v2.0 - telnet://happyland.zapto.org:11892/ (21:1/126.1)
  • From Michael Pierce@21:2/145 to apam on Sun Dec 27 06:44:34 2020

    Hello apam!

    03 Dec 20 15:14, you wrote to Rick Smith:

    Been looking at talisman bbs, looks really good... I havent read
    all the way through yet so if covered in docs I apologize, plans to
    support jam? Message areas all need to manually configured or can
    you import .NA?

    Thanks :) No, no plans to support JAM. Areas must be configured
    manually at present, though I could look at importing NA.

    Andrew

    have a couple of questions
    1 .. Would it be possible to use something like fconf2golded -a to generate a file that could be imported into Talisman ???
    2 .. what is the min/max security level or is there one??
    3 .. is there a "sysop" security level?
    4 .. does Talisman support multible FTN's (fidonet/fsxnet/etc) yet?


    Michael


    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Mike's Mansion - Portland, OR - mansion.dynv6.net:2323 (21:2/145)
  • From Tiny@21:1/130 to Michael Pierce on Mon Dec 28 10:13:38 2020
    Michael Pierce wrote to apam <=-

    I'm not apam but I can answer most of them.

    1 .. Would it be possible to use something like fconf2golded -a to generate a file that could be imported into Talisman ???

    This may or may not be on his list of things to add.

    3 .. is there a "sysop" security level?

    Create one if you need it. I have New user, Validated user, sysop.

    4 .. does Talisman support multible FTN's
    (fidonet/fsxnet/etc) yet?

    Yes. I have both happynet and fsxnet configured.

    Shawn

    ... My computer never locks u

    --- EzyBlueWave V3.00 01FB001F
    * Origin: Tiny's BBS - telnet://tinysbbs.com:3023 (21:1/130)
  • From apam@21:1/182 to Michael Pierce on Mon Dec 28 21:07:10 2020
    1 .. Would it be possible to use something like fconf2golded -a to
    generate a file that could be imported into Talisman ???

    Not presently. I'm looking at adding a fidonet.na importing thing, but
    it's not ready yet.

    2 .. what is the min/max security level or is there one??

    minimum is 1 maximum would be around where maximum integer value is i
    suppose.

    3 .. is there a "sysop" security level?

    Not by default, but you can easily add one. By default everyone is level
    10.

    4 .. does Talisman support multible FTN's (fidonet/fsxnet/etc) yet?

    Yes.

    Sorry I didn't see this post sooner.

    Andrew


    --- Talisman v0.8-dev (Linux/armv7l)
    * Origin: HappyLand v2.0 - telnet://happyland.zapto.org:11892/ (21:1/182)
  • From SirRonmit@21:2/120 to apam on Sat Jan 16 12:50:51 2021
    Finally had some time to grab and install.
    Easy peazy.
    I will check your BBS here in a few. I was attempting to test a DOOR file,
    but not sure I'm getting the commandline properly.
    I'll leave a message on your BBS.

    Tim N
    admin@f4fbbs.com

    --- Mystic BBS v1.12 A44 2020/01/16 (Windows/32)
    * Origin: Files 4 Fun BBS (21:2/120)
  • From apam@21:1/126 to SirRonmit on Sun Jan 17 11:57:48 2021
    I'll leave a message on your BBS.

    I've replied here :)

    Andrew


    --- Talisman v0.10-dev (Linux/x86_64)
    * Origin: Talisman BBS - telnet://talismanbbs.com:11892/ (21:1/126)