1. Forum
  2. FIDO
  3. RBERRYPI

  • RP2350 / Pico 2 latchup woes

    From Theo@3:770/3 to All on Sat Sep 7 10:45:09 2024
    Seems like the GPIO pullups on the RP2350 are having issues with latchups: https://hackaday.com/2024/09/04/the-worsening-raspberry-pi-rp2350-e9-erratum-situation/
    https://www.hackster.io/news/problems-with-the-raspberry-pi-pico-2-raspberry-pi-rp2350-deepen-as-projects-hit-by-erratum-e9-e2ed0c2f0810

    Erratum E9 in the datasheet is worth reading if you are using the GPIOs -
    RPi have just updated it with more info.

    Theo

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Single Stage to Orbit@3:770/3 to Theo on Sat Sep 7 11:26:03 2024
    On Sat, 2024-09-07 at 10:45 +0100, Theo wrote:

    Erratum E9 in the datasheet is worth reading if you are using the
    GPIOs - RPi have just updated it with more info

    If they're going to revise the stepping to fix the issues they might as
    well add floating point to the Hazard3 cores.
    --
    Tactical Nuclear Kittens

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From druck@3:770/3 to Single Stage to Orbit on Sat Sep 7 16:17:40 2024
    On 07/09/2024 11:26, Single Stage to Orbit wrote:
    On Sat, 2024-09-07 at 10:45 +0100, Theo wrote:

    Erratum E9 in the datasheet is worth reading if you are using the
    GPIOs - RPi have just updated it with more info

    If they're going to revise the stepping to fix the issues they might as
    well add floating point to the Hazard3 cores.

    Adding FP to the cores is a lot bigger change than just dropping in a
    version of the 3rd party pinpad which works to spec. Anyway if you want
    FP use the vastly more capable ARM cores, the RISC V ones are just toys.

    ---druck

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)